Engineered to meet your specification, Ennis-Flint waterborne and solvent based traffic paints are for use on streets, highways, local roads and private properties.
Environmentally friendly and lasting pavement markings, waterborne traffic paint is based on proven acrylic emulsion technologies. Formulated for use in a wide range of applications from streets and highways to parking lots, waterborne traffic paints can be applied from temperatures as low as 35°F to as high as 120°F. Waterborne paints are suitable for application on both bituminous and concrete substrates and can be sprayed with airless or conventional spray equipment.
Solvent based traffic paints are especially suitable for colder ambient applications where waterborne cannot be used. Suitable for application on bituminous and concrete substrates, a 15 mil application can be applied at temperatures near freezing; for faster drying times, it can be heated (maximum of 125°F) and sprayed with airless or conventional spray equipment.
-
- Low VOC formula traffic paint; non-flammable
- Reduces and cleans up with water
- Excellent atomization and application characteristics
- Dries to a durable, abrasion-resistant finish in temperatures of 50°F and rising
-
- Worker and environmentally friendly
- Proven waterborne acrylic durability
- Minimizes traffic control when restriping
- Dries to no track in 2 minutes or less under standard conditions at 15 wet mils
-
- Increased durability through greater film build (30 mil)
- Dries to “no track” in 3 min. or less under standard conditions at 30 mils
- Flexible paint film to withstand road expansion/contraction
- Has ability to hold larger beads for enhanced retroreflectivity
-
- Specifically for use where dirt pickup is an issue
- Excellent atomization and application characteristics
- Performs equally well on both asphalt and concrete surfaces
- Most commonly used for curbs on roadways and parking lots
-
- Developed for use from early Spring until late Fall
- Specialized formula eliminates switching to solvent systems in cold climates
- Eliminates hazardous waste and minimizes exposure to chemicals
- “No track” in less than 10 minutes at temperatures of 35°F and rising
-
- Applies with ease at ambient temperatures as low as 40°F
- Designed to be used with or without glass beads
- Allows for traffic markings in the colder “shoulder” season
- Dries to no pickup in 10 minutes or less when applied at 15 mils